KPOP Demon Hunters - Bookmark Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A set of KPOP Demon Hunters bookmarks, individually of Rumi, Mira, and Zoey.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 103
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.
Pictured are printed using an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Cobalt Blue Transmission Distance: 3.9
PLA BambuLab Basic Magenta Transmission Distance: 3
PLA BambuLab Basic Gold Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 4.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer (0.56mm) swap to Cobalt Blue
At layer (0.8mm) swap to Magenta
At layer (1.04mm) swap to Gold
At layer (1.28mm) swap to Jade White for the rest.
This is a five color print. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS.
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.
More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames
They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections
