Uline Wire Rack 1/4" Bolt Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used to bolt something to the side of a Uline wire shelving unit such as a sheet of plywood or any other custom project.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Used to bolt something to the side of a Uline wire shelving unit such as a sheet of plywood, or any other custom project. Uses a 1/4" hex head bolt.
This was designed for a Uline brand shelving unit but it may fit other shelves that have these critical dimensions:
Horizontal edge wire diameter: 1/4" / 6.35mm
Shelf height: 1.145" / 29mm (Advertised as 1¼")
Top wire diameter: 0.145" / 3.68mm
Space between top wires: 0.64" / 16.25mm
Recommended Print Settings:
Material: PETG/ABS/ASA
Layer Height: 0.2mm
Wall Line Count: 5
Infill Percentage: 30%
Support: No