KPOP Demon Hunters Cover

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Finishing out the Kpop Demon Hunters, the Huntr/X members are joined together to make them appear as an album cover. Added the KPOP Demon Hunters and Huntr/X logos to them. Hope everyone enjoys this craze. Was fun making them. 

Pictured are printed using an 0.4mm Nozzle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Cyan Transmission Distance: 3.5

PLA BambuLab Basic Magenta Transmission Distance: 3

PLA BambuLab Basic Gold Transmission Distance: 5

PLA BambuLab Basic Jade White Transmission Distance: 4.6

This print uses 5 unique filaments 

Swap Instructions:

Start with Black

At layer (0.64mm) swap to Cyan

At layer (0.88mm) swap to Magenta

At layer (1.12mm) swap to Gold

At layer (1.36mm) swap to Jade White for the rest.

This is a five color print. Use this tutorial by Cloudy Nostalgia to print more than 4 colors on 1 AMS. 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.  

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections