GUDE GS 4002 P Rope Mount (Handle Replacement)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A heavy-duty replacement part for the GÜDE GS 4002 P water pump. Replaces the original handle with a strong rope eyelet.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 28
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
🛠 GÜDE GS 4002 P - Rope Mount (Handle Replacement)
A practical, heavy-duty replacement part for the GUDE GS 4002 P submersible water pump.
This model replaces the original stock handle with a robust, dedicated rope eyelet (loop). It allows you to safely hang and lower the pump into a well using a safety rope or cable, preventing dangerous tension on the power cord or water hose.
Key Features
Perfect Fit: Designed specifically as a direct replacement for the GUDE GS 4002 P handle.
Safety First: Keeps the weight of the pump off the electrical cable and hose.
Heavy-Duty Design: Reinforced eyelet to withstand the weight of the pump under water.
Recommended Print Settings
Because this part will hold a heavy pump submerged in water, do not use standard PLA or default print settings.
Material: PETG, ASA, or ABS (UV resistant, water-resistant, and tougher than PLA).
Wall Loops / Perimeters: At least 4 to 6 walls for maximum structural strength.
Infill: 30% - 50% (Gyroid or Cubic for multi-directional strength).
Layers: 0.2mm for optimal bonding.