Gengar - Bookmark / Portrait
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Pokemon bookmark and portrait of Gengar
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 1
- Views
- 67
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.
Gengar in a dynamic and bold illustration.
Pictures shown are printed in an 0.4mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.
The bookmark is on plate 1 and plate 2 has the portrait - same swaps.
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Purple Transmission Distance: 3.6
PLA BambuLab Basic Magenta Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer (0.96mm) swap to Purple
At layer (1.2mm) swap to Magenta
At layer (1.52mm) swap to Jade White for the rest.
More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames
They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections
