Print-In-Place Kite Reel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to make a completely printable kite string reel with capabilities only found on versions using fasteners.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
I was inspired by @JakubLattenberg "Flying Kite Reel" that used a print in place reel assembly but wanted to design one with more capabilities that didn't require metal hardware.
PLA / 0.3- to 0.4-mm /2 Perimeters /15% Gyroid Infill / No Supports
Ensure the Spool Lock Button and Knop move freely after printing.
Install rubber bands into the Platform & attach to the Trigger (the trigger is used to apply drag on the outer spool as string is being dispensed)
The Spool Lock can only be engaged when the arrow on the outer spool aligns with the circle on the inner spool.