INGCO cordless jigsaw dust chute and plastic sole.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade for you INGCO/TOTAL/JADEVER/EMTOP/WADFOW/DYLLU simple Jigsaw with steel plate version
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
A small upgrade for the INGСO cordless jigsaw (as well as similar INGCO/TOTAL/JADEVER/EMTOP/WADFOW/DYLLU jigsaws).
1. Dust collector (for a diameter of 35 mm).
In this case, I had to split it into two parts. This eliminates a need for supports and allows for a more durable latch.
Print settings:
Material: PETG
Layer - 0.2 mm
Wall loops - 2
Infill density - 20%
No support required.
Also we need 2 pcs universal screws 2,5x10 mm length max.

2. Plastic sole
When printing, it is advisable to use a smooth table plate.
Print settings:
Material: PETG
Layer - 0.2 mm
Wall loops - 3
Infill density - 20%
With support
