Honda PartFanMount - Anycubic i3 Mega
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update : This part works well but be aware that if you start the print with your part fan going 100% the air blowing…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 611
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Update : This part works well but be aware that if you start the print with your part fan going 100% the air blowing on the side of the part might cause the print to come away from the bed. Either start at 10%-25% like I do or maybe increase the heat of the bed to 70 to compensate.
Slightly tweaked taking into the concerns in the comments of the original piece and added a place to put the wiring. I've installed the version from before this one (one screw into the top seems to hold it secure) and it's working great.
This part works with all the stock parts. If you've changed/upgraded parts you might have some fit and size issues
Print instructions
Category: 3D Printer Parts