Nomad 883 Pro Motor Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter plate to mount a 5065 outrunner to the spindle of a Carbide 3D Nomad 883 Pro.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is an adapter plate to mount a 5065 outrunner to the spindle of a Carbide 3D Nomad 883 Pro. The motor is a Flipsky 5065 sensored outrunner. It has an 8mm shaft and I used the stock Nomad to mill out an adapter from 6mm aluminum plate. It currently has a 40t pulley on the motor and the stock 20t pulley on the spindle with a 150-2GT belt. The current setup is great if anyone chooses to use it. Its currently got a BLCD-8015C driver that is interfaced directly to the original Carbide3d motion board through the original spindle driver socket. I have also added an external power supply dedicated to the spindle that has an adjustable voltage. Right now I'm limited to 36v due to the motor driver. I will be putting a either an Odrive or a VESC in its place, probably the VESC 6.7. This will require an Arduino/esp32 to convert the PWM duty cycle spindle speed signal to a PMM signal for the VESC to have accurate speed control.