Rack mounted toggle switch case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A network rack mounted modular toggle switch shelf. Faceplates can be printed either for toggle switch or blank.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Core items to print:
tsr3__CASE_r2_SIDE_ONE
tsr3__CASE_r2_SIDE_CONNECTOR
tsr3__CASE_r2_SIDE_TWO
Faceplates to print (optional):
tsr3_BLANK_gen
tsr3_TS_gen_R2
These are used for the connection sides where the M3 screw heads reside (really only need two printed)
tsr3_TS_gen_R2 -con
tsr3_TS_gen_R2 -con
(I recommend importing multiple faceplates onto one print plate to save time)
The direction for the faceplates should not matter. However, I put the side where no wall on the bottom side of the rack.
Sliced using .20m speed preset. No supports needed.
Use M3 Female Thread Knurled Nuts to connect the parts (six in total used)
M3 *12 screws used (six in total used)
In the future, the screws should be in an easier to screw location.
Originally designed for one toggle switch. See file ts7 for the original design.