Phanteks Evolv Shift 3.5" HDD mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is low profile mount designed to mount a 3.5" HDD in the Phanteks Evolv Shift.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This my first attempt at modeling. This bracket is made to mount a 3.5" HDD in the Phanteks Evolv Shift 1. It is positioned under the rear exterior cover panel and uses the original rubber drive mounts from phanteks. The mount is meant to hold the drive with the sata port point down.
I dont think the material matters much but to be safe PETG might be a good choice depending on how hot your pc might get. This is will be small unraid/truenas server so probably get hot enough to soak the PLA but ill be testing and probably printing again out ABS in the future.
feel free to remix.