Large Spool Sleeve Adapter for Flashforge AD5X
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to hold larger than normal spools on the Flashforge AD5X's IFS spool holders.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple ribbed sleeve for the Flashforge AD5X side filament holders.
Can be printed with minimal infill and 1-2 walls, since little to no force is actually applied. I used PETG just because of the colour match, but PLA will work just fine too.
To install, put your spool on the sleeve, the put the sleeve onto the regular spool holder. I've included a few different sizes to support different sized spools, but I've found that the "standard" default file will do the job.
I've included a bunch of "test slices" to test fit your spools.
These are a bit shorter than the full length of the spool holder to avoid catching or dragging when spinning.