1 / 4
Guide rails for the Harbor Freight 10" Warrior Table Saw
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement guide rails for the Harbor Freight 10" Warrior Table Saw
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
I had accuracy problems with the miter gauge that came with the saw; it was very sloppy. So I made a better one. It uses the same Miter plate. You will need an M6 nut. Due to the variance in machines, you may need to drill the pinhole to 6mm.
I will also include a guide rail to make a panel sled jig. The guide rail uses #10 wood screws.
Print setting:
PLA, PETG, or ABS
.2 layer height, 15% infill