1 / 1
Yamaha YCS1 180 Air Filter Holder Foam Filter — image 1

Yamaha YCS1 180 Air Filter Holder Foam Filter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Air filter holder for Yamaha YCS1 180 to use UNI 65PPI 5/8" foam

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

DISCLAIMER: This file is provided "as is" and without warranties of any kind, either express or implied. The creator assumes zero liability for any mechanical failure, engine damage, property damage, or personal injury resulting from the printing, installation, or use of this model. Use entirely at your own risk.

I created this to use on my 1968 Yamaha YCS1 180 to replace the original paper air filter with 65PPI UNI Foam. You will need to use fuel resistant filament, I used PETG, recommend increasing walls and top and bottom layers for structure and recommend gyroid infill I did 20%. You will need 2 housings and 4 seals, print the seals in TPU and I used 3M super weatherstrip adhesive to glue the TPU seals to the housings.

JETTING: TUNING WARNING: Changing your air intake geometry or filter media will alter your air-fuel ratio. You must check your plug color and adjust your carburetor jetting/tuning accordingly. Do not run the engine lean.

MATERIAL NOTE: This air box is located away from direct engine heat and stays relatively cool, but it is exposed to fuel vapors.

  • DO NOT use ABS or ASA, as gasoline vapors will melt them.

  • PETG works well for this specific cool environment.

  • For the absolute best chemical resistance to gasoline and maximum durability, Nylon (PA) is highly recommended.

  • Print with high wall counts and infill to ensure a proper seal.

Tags