Pikachu BookMark HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Patreon : https://www.patreon.com/cw/Vividprintwork
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The White I use was a strong one.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 157.77x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#f3d538 PLA Overture Highlight Yellow Transmission Distance: 6
#e6eaef PLA Prusament Pristine White Transmission Distance: 5.1
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Highlight Yellow
At layer #13 (1.12mm) swap to Pristine White for the rest.
Setting
Layer height: 0.08
Initial Layer height: 0.16
Wall: 2
Sparse infill density: 100%
Sparse infill pattern: Rectilinear
Turn Off Prime Tower