Waterrocket - easy to make -
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These files allow you to print a plug and guiding rings to launch your own waterrocket with a PET bottle.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Share Alike
Design is made for beginners - easy to print
The design includes to plug type for fitting the most regular bike valves. Select the correct model, see indication in the images.
Additional items
In order to launch the user should have available 1) PET bottle 2) Tie wraps 3) Launching pole (<8 mm) 4) Bike valve 5) O-ring (nice to have).
Instruction
Print the selected plug, print 2x the guiding rings. Use two tie wraps per guiding ring to install these around the PET bottle. Mount the bike valve in the plug. Tight this up strongly. Fill water 1.5L water bottle for 1/3 with water.
Printing settings
Printed with PLA
Layerthickness 0.2mm
Wallthickness 0.8mm, wall count 2
Top and bottom thickness 0.8mm, Top and bottom count 4
Infill 30%
Buildplate adhesion: Brim
Good luck printing!
-Guus