Harvest Right Freeze Dryer Bucket Drain Hose Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Secure 17mm closed-ring drain hose holder for Harvest Right freeze dryers. Anti-wobble design for 5-gal buckets. PETG.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 84
- Makes
- 1
- Views
- 193
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Harvest Right Freeze Dryer Bucket Drain Hose Clip
Overview
This is a refined, heavy-duty drain hose holder designed specifically for the Harvest Right freeze dryer 5-gallon bucket setup. It provides a secure, stable connection for the drain line, featuring smooth fillets and a high-resolution finish for a professional, clean appearance.
Key Features
* Closed Ring Design: A secure 17mm ID closed loop ensures the hose stays exactly where you want it without slipping out during a drain cycle.
* Anti-Wobble Stabilization: Integrated pads provide a snug fit against the bucket wall, preventing the clip from rocking or sliding during use.
* Ergonomic Pull Tab: Features a rounded tab for easy installation and removal, even when handling wet or cold equipment.
* Slicer-Optimized: Generated as a single connected manifold solid for error-free slicing and maximum structural integrity.
Recommended Print Settings
This part is a functional spring/clip and should be printed with settings that prioritize durability and long-term tension.
* Material: PETG is highly recommended. Its natural flexibility and resistance to stress make it ideal for the bucket rim environment.
* Orientation: Print Upright (as exported). The geometry is designed to be self-supporting in this orientation.
* Walls/Perimeters: 4 (This is critical for maintaining spring tension and durability).
* Infill: 35–45% (Gyroid or Grid recommended for functional strength).
* Layer Height: 0.2mm for a balance of strength and surface quality.
* First Layer Speed: 10–15 mm/s (Slowing down ensures a reliable bond for the upright footprint).
* Support: None (Designed to print cleanly without supports).
* Brim: 6–8mm is recommended to provide extra stability for the vertical print.
Installation
1. Feed the drain hose through the closed ring from one end.
2. Slide the clip over the rim of your 5-gallon bucket.
3. The stabilization pads should sit snugly against the bucket wall to prevent movement.
