Enclosure for Testing QRP-Labs Low Pass Filters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model used to house a PCB to help with testing QRP-Labs low pass filters. Requires some construction - see requirements
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
An Enclosure for Testing QRP-Labs Low Pass Filters
A small enclosure to house a small PCB. This help to hold different QRP-Labs low pass filters for testing with a NanoVNA. Some construction of the PCB is required and the materials are listed below.
Required Materials:-
Double Sided prototyping PCB, 3cm x 7cm, 2.54mm pitch, 1.6mm thickness
2 of 1x4 pin socket
2 of PCB Mount SMA F sockets
4 of Small pieces of component leg or wire
Nano-VNA
The pictures should guide the assembly for the small PCB holder. The 1x4 Pin Sockets usually have enough movement in then to allow alignment with the slots in the enclosure cover.
Two variants of the cover are provided, one with text as in the photo and one that is plain with no text.
Printed in PLA+ on an Ender 3 Neo, No Supports, 10% infil, 0.4mm nozzle 0.2mm layer height, Brim.
Designed on FreeCAD and Text added with Blender.