1 / 2
V-Minion electronic enclosure with Ethernet and USB
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement back panel with USB and Ethernet for V-Minion enclosure.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 394
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For this mod, You will need a USB back panel cable. I cut the Dupont connector and soldered the USB-A plug. I am using an enc28j60 module with an ethernet socket that is sticking over PCB by 2mm. You will also need to print 4 spacers (included). You need four M2.5 x 16 bolts and 4 nuts. Use the template (also included) to drill four holes. You can hold it in place with some M3 screws.
I took back panel model from: https://www.thingiverse.com/thing:5259776