Xiaomi M365 / M365 Pro Lock Holder / Bügelschlosshalter (20mm / 23mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports different lock diameters and allows easy installation without disassembling the scooter or steering assembly.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal lock holder for the Xiaomi M365 and M365 Pro scooters. Supports different lock diameters (20 mm / 23 mm) and allows easy installation without disassembling the scooter or steering assembly.
Required Hardware
4× M4 nuts
4× M4 screws (30 mm recommended, I used 35 mm screws, but they are slightly too long)
Printing Recommendations
For the best outdoor durability and UV resistance, PETG is recommended. For even better heat and weather resistance, ASA is highly recommended instead of PLA.
Recommended print settings
40% infill
Features
Snap-fit connector design for quick installation, No need to disassemble the steering wheel or scooter parts
Angled lock mounts help prevent the lock from moving while riding or steering.