SV08 9mm Gantry Upgrade & Double Shear Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SV08 9mm Gantry Upgrade & Double Shear Support
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 72
- Makes
- 0
- Views
- 589
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Upgraded Ganntry Parts for the SV08 with Double Shear Support.
All parts are already oriented for printing.
Use the following Print Setting:
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill percentage: 40%
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5
The following parts need supports:
z_carrier_A_2x
z_carrier_B_2x
tensioner_R_mid
tensioner_R_bottom
tensioner_L_mid
tensioner_L_bottom
join_R_bottom
join_L_bottom
motormount_double_shear_2x
For the correct spacing of the motor pulleys use the jig:
If you use the same motors as i do, they will work plug and play - no config changes needed.
Belts need to be routed like this:
The belts need to be the exact same lenght!
BOM
qty | description | link * |
|---|---|---|
4 | GE5C bearing | |
2 | F695ZZ bearing (double shear support) | |
2 | 42STH48-2804AH(40R) stepper (or other) | |
2 | 9mm GT2 belt 2 meters | |
2 | 20T motor pulley, Bore 5/Belt Width 9mm | |
2 | 20T toothed pulley / Bore 5/Belt Width 9mm | |
12 | 20T smooth pulley / Bore 5/Belt Width 9mm |
qty | description | link * |
|---|---|---|
2 | m3x6 (double shear support) | |
24 | m3x8 | |
12 | m3x35 | |
2 | m3x45 | |
16 | m4x35 | |
2 | m5x12 | |
2 | m5x25 | |
6 | m5x35 | |
2 | m5x45 | |
2 | m3 nuts |
Some m3x8 can still be used vom the printer. ALL m4x35 can be used from the printer!
Just get a set with different sizes - the longer ones might not be included and therefore need to be purchased seperatly.
qty | description | link * |
|---|---|---|
37 | m3 (OD 4.5mm, L 4-5mm) | |
16 | m4 (OD 6mm, L 4mm) | |
14 | m5 (OD 7mm, L 4mm) |
Heat Insert Press: https://www.printables.com/model/1296256-heat-insert-press-linear-rail-key-bak
You like the content and want to support me? Buy me some ABS!
https://ko-fi.com/andystechlab
Some of the stuff i use:
PLA Filament https://amzn.to/4eYetrV *
ABS Filament https://amzn.to/4f4zvVU *
Filament Dryer https://amzn.to/4gk8RKS *
*This link is an affiliate link, which means I may earn a commission at no extra cost to you.
Changelog:
- 21.06.26 model published