1 / 4
Chibi Robo Joints and Eyes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Found this model, but the link for the joints is dead. Created working joints.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 24
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
I found this model, but the link for the joints is dead. So I created working joints, and fitting eyes.
I scaled the model (not these joints) to 103.5%, though the joints are still stiff and don't rotate. I'd probably scale a little bigger. I've printed everything at 0.1mm layer height, with a 0.2mm nozzle, out of ABS. The joint will print and should work at 0.2mm layer heights, but everything is very small.
The short A joints are needed for the shoulders and hips, as the internal geometry is too tight.