Kactus Kutter K2 Pro Replacement Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A more robust replacement bin for the Kactus Kutter K2 Pro herb mill. Added a storage lid by request.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I love my Kactus Kutter K2 Pro herb mill, but it's stock plastic herb bin is a complete piece of trash. Two of the three corners on mine cracked within a week of ownership, which rendered the bin sloppy and useless. I spent some time reverse engineering the geometry of the bin until I had a replacement that fit snuggly without worry of it falling off, and with more robust corners that wrap up around the lower rim of the mill, giving it better stability and far less likelihood of cracking.
Added a storage lid by request. Thanks for the idea, Charles!
The model offered here is a blank canvas other than my logo, and I used CNCKitcen's custom tool at bumpmesh.com for the textured look. I encourage you to try your hand at texturing using this tool. It requires zero 3D design skill and can add a unique look to your prints!
Print Settings:
0.15mm-0.16mm layer height for proper tolerances.
12% infill should be plenty, your choice of pattern.
recommend painted supports along the rounded bottom, overhangs at the upper lip should be fine.
Perimeters = 4
print in the saved orientation with the bottom of the bin on the print plate. Same goes for the lid.
Feel free to use and remix with attribution. Non-commercial use only.
If you found this model useful, I'd appreciate a follow here or a sub on my YouTube channel, thanks!