Dish towel (wettex) wall mount with a TPU star grip holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted dish towel holder with a flexible TPU grip lock. Easy snap-fit assembly. No screws needed to change TPU.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Summary
This is a modern, sleek wall holder for dish towels, washcloths, or Wettex cloths. It features a flexible TPU push-in grip lock that securely holds a cloth by its corner with a simple push, allowing it to hang and dry efficiently.
The mechanism utilizes a three-piece sandwich design: a wall mount base, a flexible TPU star-grip insert, and an outer cover cap.
Mount the TPU-grip in the cover cap opening first.
Pressing the cover cap over the wall base firmly clamps the TPU flange in place, creating a solid assembly without needing extra hardware.
Mounting Options
The inner wall mount part can be fixed to your wall using three different methods:
3M Double-Sided Tape: Ideal for damage-free rental setups.
Countersunk Screws: Best for permanent, heavy-duty mounting on drywall or wood.
Hot Glue: Perfect for securing directly to ceramic kitchen or bathroom tiles, clean with alcohol before applying glue. The hole in the base lets the glue ooze and create a better grip.
Tolerance & Slicing Tips
The model is designed with a standard 0.2mm clearance between the inner and outer shells. Modern, well-calibrated CoreXY printers should be able to print and snap these parts together perfectly fine out of the box.
If your printer prints slightly tight or loose, use these adjustments:
If it's too loose: Wrap a single layer of electrical or teflon tape around the inner wall mount part before snapping the cap on.
If it's too tight: Scale the inner wall mount part down by
1-2%in your slicer.
Print Settings
1. Wall Mount Base & Outer Cap
Material: PLA, PETG
Wall Loops: 3 walls.
Infill: 15%–20%.
Supports: None required when oriented flat faces down, use brim for cover cap.
2. Grip Insert
Material: TPU (95A or softer). This must be printed in flexible filament to allow the flaps to bend and grip the towel corner safely.
