HC Dynamo Pardubice Coaster - Optimized for 0.4mm nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified the logo geometry for a standard 0.4mm nozzle and created two size variants (86mm and 100mm).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Optimized versions of the hockey club coaster, now available in two different sizes!
The original geometry required a 0.2mm nozzle, but I modified the design so you can easily print it using a standard 0.4mm nozzle without losing any details.
### Included Sizes:
* 86 mm diameter (compact size)
* 100 mm diameter (standard size for larger mugs/glasses)
### Print Settings:
* Nozzle: 0.4 mm
* Layer Height: 0.2 mm
* Infill: 15 - 20%
* Material: PLA or PETG (White and Red)
Note: Don't forget to set up a color change (filament switch) in your slicer at the right layer height to get the two-color effect!