Contigo Coffee Mug Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an aid for opening that Contigo thermal mug in the morning...
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Contigo Coffee Mug Wrench
This is an aid for opening that Contigo thermal mug in the morning for those with poor grip strength or just low caffeine levels. The situation is a bit Catch 22ish - you can't open the mug without some coffee but you can't fill it without opening it.
It's probably overkill; certainly not an elegant solution but it works. It fits two styles of Contigo mugs, shown in the image. The inside diameter is 78 mm. I don't recommend using it for closing lids, only for opening them.
I printed this from PLA with three shells, 0.2 mm layers, 0.5 mm walls and 25% infill. Supports are needed for the handles.