Miata Speaker Windblocker Kicker KSC270 Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I purchased a speaker windblocker for my Miata, and found that I could upgrade the speakers. I just needed an adapter...
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 92
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After tracking down a really nice windblocker for my NB miata that included speakers, I decided taht the stock speakers suck and I want upgrades. So I went off researching if it were possible to replace the speakers in the windblocker with something that had a bit more kick. Thats when I tracked down the Kicker KSC270, a near perfect fit!
The only piece that wasn't possible was getting it to screw in. So I went to down creating an adapter that allowed me to do just that!
Granted, you will need to use a heat gun on the back plastic to stretch it a bit, but other than that it's perfect! (It is a bit loud from my head unit... so I had to cut some of the sound from the back and more to the front...
Each piece should sandwich the speakers lip and hold it in place! Remember... hot car... use something heat resistant to print!