Ratchet Strap Edge Protector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protect the edges of boxes, furnature from ratchet strap damage!
- Rating
- 5 / 5
- Likes
- 391
- Downloads
- 447
- Makes
- 4
- Views
- 2,187
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The current width is 25mm but this can be scaled in the slicer. Only scale in 1 dimension to adjust for belt width! Scale in the other two dimensions if your belt is thicker than standard!
Example scales:
- 50mm strap: 200%
- 35mm strap: 140%
- 25mm strap: 100%
- 20mm strap: 80%
- 15mm strap: 60%
- 12mm strap: 48%
- 10mm strap: 40%
[1mm width = 4% scale]
Suggested material: ABS/ASA. Only use PLA for light loads. Use 5 walls at a minimum! I suggest using PLA if you only want to hold down cardboard boxes. For Furniture, or similar, use ABS, ASA or stronger
Print in this orientation for best results:

Use the "SmallerEdgeRadius" models for a higher strength hold. I suggest using this model only if you know your box will have 90 degree corners exactly. Many cardboard boxes bulge from the middle, and their edges are 91+ degrees. The big radius allows the parts to eversoslightly bend and conform to non-perfect edges. The smaller radius variation has more material in that corner, making it stiffer and stronger, but may not be as snug of a fit for imperfect edges
For another strap-based model, check out the strap clamp: