1 / 2
FormD T1 GPU Travel Kit + Anti-Sag for MSI RTX 5070 Ti/5080 Ventus 3X — image 1
1 / 2

FormD T1 GPU Travel Kit + Anti-Sag for MSI RTX 5070 Ti/5080 Ventus 3X

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

FormD T1 GPU Travel Kit and Anti-Sag for MSI RTX 5070 Ti/5080 Ventus 3X

Rating
0 / 5
Likes
3
Downloads
22
Makes
0
Views
306
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

The 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's ASUS Pro Art 3D file and the Back Panel from FormD official website for the ASUS Pro Art 3D model (although the model also made by EIGA...)

I build this for my MSI RTX 5070 Ti Ventus 3X, but since both the RTX 5070 Ti ventus 3x and the RTX 5080 ventus 3x dimensions are the same, should be applicable to both

Notes: This model require you to change the FormD T1 to 3.25 slots mode

This layout will give you 10mm space between the GPU and the Motherboard for airflow

What is included in the file:

  • GPU Travel Kit

  • GPU Bracket (Anti-Sag)

  • GPU Hook (Anti-Sag)

What you need:

  • 1 x M3x4x5 Heat Set Insert

  • 3 x M3x8mm

  • 4 x M3x6mm (should be included/given by the case)

  • 2 x M3x15mm Spacers

How to Install:

  1. First you need to change the FormD T1 case mode to 3.25 slot

  2. Then Install the 1 x M3x4x5mm Heat Set Insert to the GPU Bracket

  3. Unplug your GPU from the PCIe slot

  4. Install the GPU Bracket to the GPU using 2 x M3x6mm

  5. Install the GPU Hook to the GPU Bracket using 1 x M3x8mm to form the GPU Anti-Sag

  6. Now remove all screws in the existing GPU back panel

  7. Install the GPU Travel Kit Back Panel using the screws that you have just unscrew from the existing back panel

  8. Install the 2 x M3x15mm Spacers in between the Case and PCIe Riser

  9. Then Remove all screws that attach to the back side of the FormD T1 case

  10. Now install the GPU to the back side of the FormD T1 case using 2 x M3x8mm and 1 x M3x6mm (it will be a lil bit tricky as you also need to plug your GPU to the PCIe slot. Be patient and careful please!)

  11. Then screw the GPU Anti-Sag using 1 x M3x6mm to the case

  12. Re-screw the back side of the FormD T1 to the case

  13. Done

Special thanks to EIGA for the 3D base model, as I would not be able to produce that super clean and detail 3D model myself