Tie rack for Aurdal
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.49 – €9.15 net (excluding VAT)
For file: Nested Aurdal rod - complete.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.32 excluding VAT (range midpoint).
- Weight reported by the author
- 69 g
- Print time reported by the author
- 10 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A tie rack that mounts to the side panel of an Aurdal closet organizer.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 369
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After getting our new closet organizer installed I started looking at what upgrades we could make to it. After printing some drawer pulls I was looking for a way to organize my ties.
Given the limited bed size on my Ender 3 Pro I was unable to print the entire thing so this is designed as an expandable rail, the two outer ends and a rod that fits in the middle.
This is not designed to take a lot of weight since it's hanging off the side of the panel.
Additional Print info:
- Filament: Voxelab PLA+ Black
- Infill: 50%
- Infill Pattern: Gyroid
- Print Temp: 220c
- Bed Temp: 60c
- Supports:
- Tree
- Touching Buildplate
- Overhang Angle: 85 deg
- The goal is to support the end of the rails and the pegs on the supports
- Approx 250mm / 10in of clearance from the panel to the bar