Helm Seat Bushings for Beneteau Oceanis Sailboats
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the bushings that hold up the helm chair on your Beneteau sailboats
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
If you own a Beneteau sailboat these might be the bushing that holds up your helm seat. As you enter the boat from your sugar scoop, these bushings protrude from the fiberglass to hold up your removable helm chair.
On my Oceanis 411, these aren't quite long enough, and sometimes the helmsman's seat falls through, which is both a man-overboard danger as well as wildly uncomfortable. It's such a simple design, so I don't know if my fiberglass has deflected or if the bushings have somehow compressed over the years, but I remodeled it to be slightly longer.
Looking at the included picture, the white version is the original from my sailboat, while the longer one to the right is the exact duplicate but with the central shaft extended to prevent fall-through. To the left is an altogether different version -- it maintains the extension, but allows for the part to be printed horizontally.
Because the seat pushes down on the layer lines, I'm not 100% sure how well they're going to hold up. I've printed these parts in Fiberon PA612-CF15, so I think the shear resistance will be fine despite having annealed it, but in the event that it fails, I have printed backups that reorient the layers for strength on the correct axis.
These are modeled from my 2001 Beneteau Oceanis 411, but I sometimes do club races on a 393, and tho I haven't put calipers to them, their bushing looks the same, so I suspect this is a universal part to that era of Beneteaus.
Feel free to message me with any suggestions or requests for change.
