Easy Assembly Pokeball
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print and assemble Pokéball All parts are printed separately and placed together. The ring in the middle can…
- Rating
- 4.917 / 5
- Likes
- 97
- Downloads
- 549
- Makes
- 18
- Views
- 3,613
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Easy to print and assemble Pokéball
All parts are printed separately and placed together. The ring in the middle can be any colour and is just there to position the other parts. Everything just slots together.
Can be glued to stay together permanently. Alternatively you can scale up the internal ring in the z direction to decrease the tolerance and make a tighter fit.
100% size is 40mm
Top and bottom should be printed at low layer height, i used 0.12. other parts can be any layer height. I printed the top and bottom domes with support but depending on your printer you may be able to print without them.
Edit 15/10/18: Fixed the button files that seemed to be 10x size as I managed to save it in cm!
Custom Section
Category: Art