1 / 3
Tesla Coil Toroid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toroid for a small to medium size Tesla coil
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v3.0
Toroid Major diameter is 250mm, Minor diameter is 110mm and has a depth of 70mm. Calculated capacitance is 10.9 pF.
I printed this solid using 0.16mm layers lines and grey PLA, do not use black filament! No supports needed
Each part of the ring segment is glued together and the plate is glued to the underside. Its a tight fit and may require a little sanding to lock each piece together. The once glued I gave it a light sanding all over and used strips of silver foil tape to cover. The plate has a 8mm hole in the centre for bolting onto the secondary coil.