1 / 3
Louder ESP32 case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lowprofile case for the Louder ESP32 board with a rotary encoder
- Rating
- 4.5 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 1
- Views
- 294
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case snuggly fits a Louder ESP32 board (tested with the S3 variant) with external antenna and a front rotary encoder for volume control..
The encoder is a basic EC11 with push action. You will need to solder wires to the pads "1", "2" and "42" on the bottom of the board. If using Squeezelite firmware, set the NVS option "volume_rotary" to "A=1,B=2,SW=42".
Requires 3 M3 20mm screws and you should tap the holes on the bottom part before assembly.
3MF, STEP and SolidWorks files are provided.