Nvidia RTX Pro 6000 Blackwell Server Edition - dual card 80mm fan duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fan duct for multi GPU rigs of Nvidia RTX Pro 6000 Blackwell Server Edition. Tested with 80mm ARCTIC S8038-10K
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 53
- Makes
- 0
- Views
- 262
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Print in PETG, bottom down, no supports are necessary (tested on Prusa MK3S).
For single GPU, I successfully used original model designed for 120mm fans, but it cannot be used for multiple cards in AI rig. This 80mm fan duct works great for two cards, and it can be stacked further.
Tested with 80mm ARCTIC S8038-10K and the cards were below 80C at full load at 2x600W TDP, while fan was at 80% duty (ambient temperature ~23 C). I normally run cards limited at 400W so there's plenty of headroom for cooling with this design.
Thanks to my colleague Petr who designed this piece for my AI rig :-).