1 / 6
Small Inverse Fillet Based Shelf
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple shelf bracket for low weight stuff. Uses two standard wood or dry wall screws and two small nails to mount.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple shelf bracket for mounting lightweight shelves.
It uses two screws in the back and I used two brads/small thin nails as dowels to mount the wood to it.
The top edge of the print may turn out squigly due to min layer time being too low - I found that it's pretty hard to notice when mounted though.
Printed in PLA with no supports and more or less default settings (2-3 walls, 5 top/btm layers, 15% infill).
Shelf is 135x57x57mm in size