Epaper beer font label
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
E Paper Tap Labels for home brew
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Labels for your home brew taps that fit 33mm diameter tap spouts and fit a 2.9 inch ePaper screen.
I used the 2.9 inch display from Gicisky - https://www.aliexpress.com/item/1005002399342939.html?gatewayAdapt=kor2glo
And using the Gicisky integration in Home Assistant to push the images to them -https://github.com/eigger/hass-gicisky
(yes I did use AI to generate the imaged for the labels I have no artistic talent)
The rest of the hardware used is 2xM3 heat set inserts and 12mm M3 cap head screws to clamp the two halves together.
Printed at 0.2mm in PLA but you could print in anything you want.
it can be printed with out supports if printed up side down.