Bialetti Venus Funnel and Stand - 6 Cup
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stand and funnel to make pouring ground coffee easier.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 64
- Makes
- 0
- Views
- 543
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This can be used as a stand alone funnel to fill the Bialetti Venus 6 Cup Moka pot filter. But was designed with the Melitta Calibra coffee grinder in mind, which has an inbuilt weight scale which allows for more accurate coffee dosages.
I have quite high tolerances to accommodate for size differences in the filter which is nothing but a perfect cylinder. The tolerances between the cup and the funnel is 0.2 [mm] and 2 [mm] for the filter insert into the cup-part. Becuase of the small lip on the filter, and an overhang on the funnel, no Coffey ends up out side of the filter.
Printer settings: Can be printed without supports if funnel is placed upside down. Infill is not needed, but i printed with 5% infill gyroid, because like it.
Material: I chose PETG as i find this to be an excellent material with many use-cases.
G-Code: Is uploaded as a reference. Don't use this file. Use the 3mf-files and whatever settings works best with your printer.