1 / 2
watering can funnel for side filling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If the water tap is very close to the wall, then you need this device. ;-)
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 1
- Views
- 95
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
The ring has a groof, where it is mounted inside off the watering can. The diameter is about 5% larger and there is a 5% gap of the circumference. This acts as a spring mechanism (if it does not work in the longtime, i will use glue ;-)).
The side section has been created by segments. Could also be created as a cut of a eliptical tube.
Model is created in OpenSCAD and mostly parametrical. So you can create your own for your can.
This model was made for a 102mm hole of the watering can.