Eufy E18 / E15 / TerraMow Robot Mower Disc 7 Blade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrades your Robot Mower from a 3 blade setup to 7 blade.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 81
- Makes
- 1
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
Fits:
Tested on: Eufy E18
Should Fit: Eufy E15 E18, TerraMow V600, V1000, S800 S1200
Hardware Needed:
ASA Filament (or something outdoor-worthy)
Tools Needed:
Screwdriver
Soldering Iron (or something hot to set the threaded inserts)
Instructions:
Print flat side down. Use supports inside the 3 middle holes. Don't use supports on the outside ones if possible
Unscrew the 3 screws from the center of the original disc & remove
After pulling our supports, use a soldering iron to carefully set threaded inserts into each hole.
Screw the new disc onto the mower and install blades, ensuring the blades swing freely on the shoulder of the screw.