Hildagard 395 DJI Air Unit Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mounting plate for the DJI Air Unit for the Hildgard 395 V6. Attached via M2 screws through existing holes in the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
A mounting plate for the DJI Air Unit for the Hildgard 395 V6.
Attached via M2 screws through existing holes in the top plate. The holes in the mount are deliberately undersized and if drilled out with a 1.6mm drill the M2 screws will self tap perfectly.
And a zip tie holds the air unit securely.
The MMCX Right Angle to SMA Right Angle 7cm Pigtail Adaptor Cable can be found here https://droneauthority.co.uk/?ref=btqgh4zz-kdy
Print Settings
Printer:
P3 Steel
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament:
Filamentive PETG
Any
Notes:
Any material does the trick.
Category: R/C Vehicles