Desoldering tool stand with magnetic base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple stand to hold my desoldering tool at the ready
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
The idea for this came as an "add-on" to my revised magnetic solder spool holder.
The cup holds a manual pump vacumm desoldering tool at a convenient 45 deg angle.
The base has pockets for 10x2mm magnets. It attaches nicely to a swing arm lamp with a metal base on my work bench.
Designed in TinkerCAD and printed on my Elegoo Centauri Carbon using Orca Slicer.
Mine is printed in PETG-CF but, any filament will likely work just fine. I used 0.20 layer height, 4 walls, & 25% infill as I tend to "overbuild" things. I also used adaptive layer height for the "bottom" of the tool holder well. The tool holder was printed inverted with tree supports. I also used tree supports for the arches in the base.
Assembly is simple. Gently pry the base uprights apart just enough to get the pocket arms to fit in to the corresponding sockets on the uprights.