1 / 1
AD5X Stoma Bag
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fix the fixing bar to the back of the printer using the 2 screws either side, then just hang the box on the fixing bar.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A simple "poop chute" box that hangs off the back of an AD5X
Fix the fixing bar using the 2 AD5X screws either side of the poop exit, then just hang the box off the fixing bar. The box is large but shaped to curve away from the back of the machine to minimise blocking of the ventilation louvres.
Probably most useful if printed using transparent filament with 100% infill (so you can see how full it is) but there are grids of small holes up each side so you can see whatever material/colour you use.
I hope it's useful.
