1 / 1
Scrubber Plugs for the KISS Sidewinder Rebreather with Light Monkey Towers — image 1

Scrubber Plugs for the KISS Sidewinder Rebreather with Light Monkey Towers

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The plugs will fit the loop orifices on the scrubber bodies of the KISS Sidewinder with the Light Monkey towers.

Rating
0 / 5
Likes
0
Downloads
8
Makes
0
Views
33
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The plugs will fit the loop orifices on the scrubber bodies of the KISS Sidewinder with the Light Monkey tower upgrades installed. The O-ring grooves are designed to take the same size O-rings as the towers, making it easy to get the right size ones from a spares kit. Use the plugs to seal your scrubber airtight if you are storing the sorb between dives. Their ends are also designed to be slightly larger than the outside of the orifice, and thus can be used to protect the unit during travel. And they have little holes to make it possible to fit a string to hang them when not in use. The version of the plug with two vent holes, and a plug and hose adaptor for the hole (should be printed in TPU). This allows you:

  • take the closed scrubbers and sensor head with the cover and vented plugs fitted onto flights, without the plugs popping out due to the decreased cabin pressure;
  • feed an O2 hose from the MAV through one hole for sensor calibration, while allowing excess gas to escape through the other hole. The details of the process for this are in this design.

Category: Sport & Outdoors

Tags