Saltwater Crocodile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An original model of an Australian saltwater crocodile.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Standard Digital File License
An original model of an Australian saltwater crocodile found in the northern regions of the continent.
I printed this model using an Elegoo Saturn 3 ultra resin printer.
I used a ABS-like white resin with 15% Siraya Tenacious.
Elegoo SatelLite Slicer was used.
5 Base layers for 30 sec exposure
8 transitional layers
2.6 sec exposure for the rest.
55 / 90 mm/s and 65 / 90 mm/s lift speeds
90 / 55 mm/s and 90 / 65 mm/s retract speed with 1 sec after retract pause.
6 min wash with IPA and 2 min UV cure.
Model was printed at a 30 degree angle and with supports. It failed when printed flat.