1 / 1
Cheese Slice Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
80 mm high basic Cheese Slice Holder.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 143
- Makes
- 3
- Views
- 469
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Basic cheese slice holder.
- I'd suggest printing at 0.2 mm layer height. The design is optimized for that.
- I'd suggest printing with a 0.4 mm nozzle.
- ~20% infill is fine - it's just for the base. Make sure your settings are for 2 perimeters and that way the upright walls will print solid and cleanly.
- PLA will print the best; PETG will cause a lot of stringing between the guide pieces.