1 / 3
R380 gearbox seal installer / LRT-37-014
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Land Rover R380 gearbox seal installer / LRT-37-014
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Output shaft seal installer tool. Seal must NOT be pressed fully in, because there is oil hole behind (as you can see on photo).
Works even with the ring installed. Internal grooves prevent the shaft from rotating during tightening. Requires an M12x30 bolt and washer. Simply hold the body and tighten the bolt to easily press the new seal into place.
Recommended print settings: 3 perimeters and 60% infill.
FreeCAD 1.1 file attached.
