Data General Dasher D2 6053 Knobs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting Knobs for The Data General Dasher 6053 Terminal
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
If your Data General Dasher D2 (6053) has broken or missing knobs on the frame, this print can serve as a replacement! Both files use a 5/16"-18 TPI nut that uses a 1/2" wrench. The specific one I used can be found at Home Depot with SKU 1006540107. (I purchased mine in store)
The regular DasherKnob.stl is designed to be mostly accurate to the original except using a nut rather than a heat-set insert. You could remix this to take such an insert for total accuracy. However, I recommend using the DasherKnobSolid.stl instead as it will be a lot stronger.
Be sure to add a pause to your print right before the layer covering the nuts. You will need to place the nuts into the print at this point before continuing the print. I printed mine using some absurd number of walls to effectively get 100% infill with a radial print pattern. It's HEFTY. I'm sure you can get away with using less filament if you'd like though. Mine were printed with Prusament Galaxy Black PETG. A more solid black may look more authentic.
These knobs will also most likely fit a Dasher model 5210. Please do let me know if you try it.