1 / 1
Captive nut depth calibration plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibration plate for M3-M6 nuts
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This is a Z-axis calibration plate for captive nuts from M3 to M6. Each nut's hole has a +0.2mm tolerance so the nut should definitely fit in (but ymmv still) and variations of hole depths are from nominal to +0.4mm with 0.1mm increments. Each metric nut is represented in two sizes: ordinary and nyloc (nuts with nylon inserts).
This calibration plate must be printed with at least 0.1mm (and ideally 0.05mm) layer height for calibration to make sense.