Luth-AR MBA Stock Picatinny Rail | Monopod & Accessory Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Luth-AR MBA Stock Picatinny Rail Monopod & Accessory Mount
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Overview
The Luth-AR MBA series is a staple for precision AR-15 builds, but adding a rear monopod or specialized accessories often requires an additional mounting point. This 3D-printable Picatinny rail is specifically designed to interface with the factory mounting holes of the Luth-AR MBA-1 or MBA-3 stocks. It provides a rock-solid attachment point for monopods, sling mounts, or bag riders, enhancing your stability during long-range precision fire.
Why use this?
Monopod Ready: Perfectly positioned to accept standard Picatinny-mounted monopods for fine-tuned elevation adjustments.
Seamless Fit: Engineered to follow the specific geometry and hole spacing of the Luth-AR MBA stock series for a factory-installed look.
Stability Upgrade: Ideal for "benchrest" or "prone" shooting, allowing you to use a rear support to maintain a perfect point of aim.
Tactical Versatility: Provides a standard rail interface for any Picatinny-compatible accessory at the rear of your rifle.
Technical Specifications & Printing
Since this rail will support the weight of the rifle when used with a monopod, high structural integrity is required.
Material: PETG, ABS, or Carbon-Fiber-filled Nylon/PLA. PETG or CF filaments are highly recommended for their impact resistance and rigidity.
Layer Height: 0.16mm to 0.2mm to ensure the Picatinny slots are within spec and strong.
Walls/Perimeters: 5 to 6 wall loops to ensure the mounting bolt holes and the rail teeth are solid.
Infill: 40% to 100% (Gyroid or Tri-Hexagonal) for maximum compression strength.
Hardware: Designed to be used with standard mounting hardware compatible with the Luth-AR stock's existing ports.
Designer’s tip :
When using a monopod (which is subjected to significant vertical pressure), I recommend printing the part flat on its side so that the filament layers run parallel to the rail. This prevents the teeth of the Picatinny rail from shearing off under the weight of the rifle. A quick coat of matt black paint or the use of PLA-CF filament will visually hide the layers and blend perfectly with the texture of the Luth-AR stock.
How to Use
Align the 3D-printed rail with the pre-drilled accessory ports on the underside of your Luth-AR MBA stock.
Secure the rail using the appropriate mounting screws (ensure they are tightened firmly but do not crush the plastic).
Attach your preferred monopod or accessory and verify that the rail remains stable under pressure.
About the Project
Part of the Taka Tech Lab series—bridging the gap between DIY maker culture and professional sports shooting equipment.